MIK-TDS210-B Conductivity meter

MIK-TDS210-B Conductivity/Hardness/Resistivity Online analyzer, an intelligent Online chemical analyzer, is widely applied for continuous monitoring and measurement of EC value or TDS value or ER value and temperature in the solution in the industry of thermal power, chemical fertilizer, environmental protection, metallurgy, pharmacy, biochemistry, food and water, etc.

Characteristics

Range: 0.01 electrode: 0.02～20.00us/cm

0.1 electrode: 0.2～200.0us/cm

1.0 electrode: 2～2000us/cm

10.0 electrode: 0.02～20ms/cm

Output signal: 4~20mA; Relay; RS485

Power supply: AC220V±10%, 50Hz/60Hz

MIK-TDS210-B Conductivity meter

Advantages

Isolating transmitting output, with little interference.

Isolating RS485 communication.

EC/TDS measurement, temperature measurement, top/bottom limit control, transmitting output, RS485 communication.

Configurable manual and auto temperature offset function.

Configurable upper/lower limit warning and delay.

Configurable hummer and LCD backlight switch.

Addition of universal password.

Industrial controlled door keep, to avoid instrument halted.

Specification

Product	TDS meter, EC controller
Model	MIK-TDS210-B
Measure range	0.01 electrode: 0-20.00us/cm
	0.1 electrode: 0.2～200.0us/cm
	1.0 electrode: 2-2000us/cm
	10.0 electrode: 0.02-20ms/cm
Basic Error Of Electronic Unit	EC/TES/ER: ±1%FS NTC10K: ±0.3℃ PT1000: ±0.3℃
Measuring medium	Liquid
Temp compensation	NTC10K/PT1000 Manual/ Auto temperature compensation
Temperature Range	-10-130℃
Accuracy	2%
Communication	RS485, Modbus-RTU
Signal output	4-20mA, maximum loop 750Ω, 0.2%FS
Relative humidity	(10~85)%RH
Operation temperature	0~60℃
Power supply	AC: 220VAC±10%, 50Hz/60Hz DC: 24VDC±20%
Relay output	250VAC/3A
Operation condition	Temperature: 15~65℃ Relative humidity: (5~95)%RH