MIK-TDS210-C Conductivity meter

MIK-TDS210-C Conductivity meter EC controller, an intelligent Online chemical analyzer, is widely applied for continuous monitoring and measurement of EC value or TDS value or ER value and temperature in the solution in the industry of thermal power, chemical fertilizer.

Characteristics

Range: 0.01 electrode: 0.02～20.00us/cm
0.1 electrode: 0.2～200.0us/cm
1.0 electrode: 2～2000us/cm
10.0 electrode: 0.02～20ms/cm

Accuracy: ±2%FS

Output signal: 4~20mA; Relay; RS485

Power supply: AC220V±10%, 50Hz/60Hz

Description

Industrial wastewater engineering
Process measurements, electroplating plants, paper industry, drinks industry
Wastewater containing oil
Suspensions, varnishes, media containing solid particles
Two-chamber system for when electrode poisons are present
Media containing fluorides (hydrofluoric acid) up to 1000 mg/l HF

Specification

Product	TDS meter, EC controller
Model	MIK-TDS210-C
Measure range	0.01 electrode: 0-20.00us/cm
	0.1 electrode: 0.2-200.0us/cm
	1.0 electrode: 2-2000us/cm
	10.0 electrode: 0.02-20ms/cm
Accuracy	±2%FS
Measuring medium	Liquid
Temp compensation	NTC10K/PT1000 Manual/ Auto temperature compensation
Temperature Range	-10-130℃
Communication	RS485, Modbus-RTU
Signal output	4-20mA, maximum loop 750Ω, 0.2%FS
Power supply	AC220V±10%, 50Hz/60Hz DC24V±20%, ≥6W
Relay output	250VAC, 3A
Relative humidity	(10~85)%RH
Operation temperature	0~60℃
Operation condition	Temperature: 15~65℃ Relative humidity: (5~95)%RH