| Product |
Sanitary type electromagnetic flowmeter (magnetic flow meter) |
| Model |
MIK-LDGS |
| Diameter nominal |
DN15~DN100 |
| Nominal pressure |
0.6~4.0MPa |
| Accuracy |
±0.5%，±2mm/s(flowrate<1m/s) |
| Repetitiveness |
0.2% |
| Liner material |
PFA, F46, Neoprene, PTFE, FEP |
| Electrode material |
Stainless steel SUS316L, Hastelloy C, Titanium, |
| |
Tantalum, Platinum-iridium |
| Medium temperature |
Integral type: -10℃~80℃ |
| |
Split type: -25℃~180℃ |
| Ambient temperature |
-10℃~55℃ |
| Power supply |
100-240VAC，50/60Hz / 22VDC—26VDC |
| Electrical conductivity |
Water 20μS/cm other medium 5μS/cm |
| Ingress protection |
IP65, IP68(optional) |
| Product standard |
JB/T 9248-2015 |
Mag meter works based on Faraday's law, and measure conductive medium with conductivity more than 5 μs/cm and flow range from 0.2 to 15 m/s. An Electromagnetic Flowmeter is a volumetric Flowmeter that measures the flow velocity of a liquid through a pipe.
The measurement principle of magnetic flowmeters can be described as follows: when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:
E=K×B×V×D
Where:
E－Induced electromotive force
K－Meter constant
B－Magnetic induction density
V－Average flow speed in cross-section of measuring tube
D－Inner diameter of measuring tube |
 |
The magnetic flow meter uses advanced electromagnetic technology to accurately measure the flow of liquids, ensuring that the product is of the highest quality. The MIK-LDG is designed to be easy to install, operate, and maintain, making it a cost-effective solution for food processing plants of all sizes.
One of the key benefits of the MIK-LDG Sanitary Electromagnetic Flowmeter is its ability to accurately measure the flow of liquids in a wide range of temperatures and viscosities. This makes it an ideal choice for food processing applications where the product being measured may vary in temperature or viscosity.
The MIK-LDG Sanitary Electromagnetic Flowmeter is also designed to be extremely hygienic, with a smooth, crevice-free design that eliminates the risk of bacterial growth. This ensures that the product being measured remains free from contamination and that the flowmeter is easy to clean and maintain.
All things concerned, the MIK-LDG Sanitary Electromagnetic Flowmeter is an excellent choice for food processing applications where accuracy, hygiene, and ease of maintenance are essential. Its advanced technology, easy installation, and low maintenance requirements make it a cost-effective solution for any food processing plant looking to improve its product quality and efficiency.
Electromagnetic flowmeters have been used throughout industries for more than 60 years. These meters are applicable for all conductive liquids, such as: Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc
One of the largest and most professional flow equipment production and calibration centers in China. Provide required flowmeter equipment for more than 100 countries around the world. 4.5km away from Hangzhou International Airport, worth a visit!.
