| Product |
Electromagnetic flow meter |
| Model |
MIK-LDG |
| Diameter nominal |
DN15~DN1200 |
| Nominal pressure |
DN15 - DN250, PN ≤1.6MPa |
| DN300 - DN1000, PN ≤1.0MPa |
| DN1200, PN ≤0.6 MPa |
| Higher pressure can be customized |
| Accuracy |
±0.5% F.S. (Flow speed > 1m/s); ±0.5% F.S.±2mm/s (Flow speed <1m/s) |
| Repetitiveness |
0.16% |
| Liner material |
Neoprene (CR), Polyurethane (PU), PTFE (F4), PFEP (F46), PFA |
| Electrode material |
316L Stainless Steel, Hastelloy C, Hastelloy B, Ti, Ta, Pt |
| Medium temperature |
Neoprene: -10…+60℃ Polyurethane: -10…+60℃ PTFE/FEP: -10…+120℃ PFA: -10…+120℃ |
| Power supply |
85-245VAC，50/60Hz, 22VDC-26VDC |
| Structure type |
Compact type, Remote type |
| Ingress protection |
IP65, IP68(remote type only) |
| Product standard |
JB/T 9248-2015 |
Electromagnetic flowmeters are designed based on Faraday's electromagnetic induction principle and are used to directly measure the flow of conductive liquids in closed pipes.
In addition to measuring the volume flow of general conductive liquids, electromagnetic flowmeters are also used to measure the volume flow of highly corrosive liquids such as strong acids and strong alkali, and uniform liquid-solid two-phase suspension liquids such as mud, paper pulp, ore slurry. Electromagnetic flowmeters are widely used in flow measurement in agricultural irrigation, water conservancy construction, landfill leachate and other fields.
. Reliable measurement, high accuracy and good stability.
. Integrated structure, no moving parts, easy to install and maintenance-free.
. RS485 communication interface-standard ModbusRTU protocol.
. It is not affected by the direction of the fluid and can be accurately measured in both forward and reverse directions.
. Built-in Chinese and English bilingual, free to switch.
