| Product |
Electromagnetic flow meter |
| Model |
MIK-LDG |
| Diameter nominal |
DN15~DN1200 |
| Nominal pressure |
DN15 - DN250, PN ≤1.6MPa |
| DN300 - DN1000, PN ≤1.0MPa |
| DN1200, PN ≤0.6 MPa |
| Higher pressure can be customized |
| Accuracy |
±0.5% F.S. (Flow speed > 1m/s); ±0.5% F.S.±2mm/s (Flow speed <1m/s) |
| Repetitiveness |
0.16% |
| Liner material |
Neoprene (CR), Polyurethane (PU), PTFE (F4), PFEP (F46), PFA |
| Electrode material |
316L Stainless Steel, Hastelloy C, Hastelloy B, Ti, Ta, Pt |
| Medium temperature |
Neoprene: -10…+60℃ Polyurethane: -10…+60℃ PTFE/FEP: -10…+120℃ PFA: -10…+120℃ |
| Power supply |
85-245VAC，50/60Hz, 22VDC-26VDC |
| Structure type |
Compact type, Remote type |
| Ingress protection |
IP65, IP68(remote type only) |
| Product standard |
JB/T 9248-2015 |
The electromagnetic flowmeter is designed based on the Faraday electromagnetic induction principle and are used to directly measure the flow rate of conductive liquids in closed pipelines. During on-site monitoring and display, standard current signals, pulse signals, and RS485 digital signals can be output for recording, adjustment, and control, achieving automatic detection and control.It is widely used in water supply and drainage, urban sewage, and thermal heating.
. Reliable measurement, high accuracy and good stability.
. Integrated structure, no moving parts, easy to install and maintenance-free.
. RS485 communication interface-standard ModbusRTU protocol.
. It is not affected by the direction of the fluid and can be accurately measured in both forward and reverse directions.
. Built-in Chinese and English bilingual, free to switch.
Meacon split large-diameter electromagnetic flowmeter
Electromagnetic flowmeteris used for measuring sewage pipes and water pipes in living areas
Meacon split large diameter electromagnetic flowmeter
DN900 and DN1000 electromagnetic flowmeters are used for water collection in urban areas
