| Product |
Multi-loop digital display controller |
| Model |
MIK-2700 |
| Dimension |
A. 160*80*136mm
B. 80*160*136mm
C. 96*96*136mm |
| Measurement accuracy |
±0.2%FS |
| Transmission output |
Analog output----4-20 mA, 1-5v、
0-10mA, 0-5V, 0-20mA, 0-10V |
| Alarm Output |
Over-range display value flashing alarm function With upper and lower limit alarm function, with alarm return difference setting; Relay capacity：
AC220V/2A(big)DC24V/2A(big) (Resistive load)
Note: When the load exceeds the relay contact capacity, please do not directly carry the load |
| Power supply |
AC/DC100~240V (Frequency 50/60Hz) Power consumption≤5W
DC 20~29V Power consumption≤3W |
| Use environment |
Operating temperature (-10~50℃) No condensation, no icing |
| Printout |
RS232 printing interface, micro-matched printer can realize manual, timing and alarm printing functions |
The SUP-2700 digital display controller is an electronic device used to control and monitor various processes and systems. It consists of a microprocessor, a digital display, and various input and output terminals. The controller receives input signals from sensors or other devices and processes them using its software algorithms. The results are then displayed on the digital display, providing real-time feedback on the status of the process or system being controlled. With its user-friendly interface and advanced features, a digital display controller is an essential tool for process automation and industrial control applications.
This multi-loop digital display controller can be programmed to control various parameters such as temperature, pressure, flow rate, and humidity, among others. Additionally, digital display controllers can be integrated with other systems, allowing for remote monitoring and control of processes from a central location. Digital display controllers offer high precision, reliability, and versatility in a range of industrial applications.
Multi-loop digital display control instrument with automatic SMD packaging technology, has a strong anti-jamming capability. It can be used in conjunction with various sensors, transmitters to display temperature, pressure, liquid level, speed, force and other physical parameters, and it can measure 8~16 loops, input go the rounds, support 8~16 loops “uniform alarm output”, “16 loops separate alarm output”, “uniform transition output ”, “8 loops separate transition output” and 485/232 communication, and is applicable in system with various measuring points.
Input signal type list:
| Graduation Number Pn |
Signal type |
Measure range |
Graduation Number Pn |
Signal type |
Measure range |
| 0 |
TC B |
400~1800℃ |
18 |
Remote Resistance 0～350Ω |
-1999～9999 |
| 1 |
TC S |
0～1600℃ |
19 |
Remote Resistance 3 0～350Ω |
-1999～9999 |
| 2 |
TC K |
0～1300℃ |
20 |
0～20mV |
-1999～9999 |
| 3 |
TC E |
0～1000℃ |
21 |
0～40mV |
-1999～9999 |
| 4 |
TC T |
-200.0～400.0℃ |
22 |
0～100mV |
-1999～9999 |
| 5 |
TC J |
0～1200℃ |
23 |
-20～20mV |
-1999～9999 |
| 6 |
TC R |
0～1600℃ |
24 |
-100～100mV |
-1999～9999 |
| 7 |
TC N |
0～1300℃ |
25 |
0～20mA |
-1999～9999 |
| 8 |
F2 |
700～2000℃ |
26 |
0～10mA |
-1999～9999 |
| 9 |
TC Wre3-25 |
0～2300℃ |
27 |
4～20mA |
-1999～9999 |
| 10 |
TC Wre5-26 |
0～2300℃ |
28 |
0～5V |
-1999～9999 |
| 11 |
RTD Cu50 |
-50.0～150.0℃ |
29 |
1～5V |
-1999～9999 |
| 12 |
RTD Cu53 |
-50.0～150.0℃ |
30 |
-5～5V |
-1999～9999 |
| 13 |
RTD Cu100 |
-50.0～150.0℃ |
31 |
0～10V |
-1999～9999 |
| 14 |
RTD Pt100 |
-200.0～650.0℃ |
32 |
0～10mA square |
-1999～9999 |
| 15 |
RTD BA1 |
-200.0～600.0℃ |
33 |
4～20mA square |
-1999～9999 |
| 16 |
RTD BA2 |
-200.0～600.0℃ |
34 |
0～5V square |
-1999～9999 |
| 17 |
Linear resistance 0～400Ω |
-1999～9999 |
35 |
1～5V square |
-1999～9999 |
