MIK-R6000C Paperless recorder up to 48 channels universal input

MIK-R6000C Color paperless recorder with fixed point/program segment adopts the control algorithm of differential in advance. The proportional band P, integral time I and derivative time D are mutually independent of each another without affecting each other when being adjusted. The system overshoot can be controlled with strong anti-jamming capability.

Characteristics

Inputs channel: Up to 48 channels of universal input

Power supply: AC85～264V，50/60Hz; DC12～36V

Display: 7 inch TFT display screen

Output: alarm output, RS485 output

Dimensions: 185*154*176mm

Introduction

MIK-R6000C paperless recorder is equipped with 24-channel universal input (able to input by means of configuration: standard voltage, standard current, thermocouple, thermal resistance, frequency, millivolt, etc.). It can be equipped with 8-loop control and 18-channel alarm output or 12-channel analog output, RS232/485 communication interface, Ethernet interface, mini-printer interface, USB interface and SD card socket; it can provide sensor distribution; it owns powerful display function, real-time curve display, real-time control display historical curve retrospection, bar graph display, alarm status display, etc.

MIK-R6000C Paperless recorder up to 48 channels universal input

Specification

Product	Paperless recorder
Model	MIK-R6000C
Display	7 inch TFT display screen
Input	Up to 48 channels of universal input
Relay output	1A/250VAC, Max 18 channels
Communication	RS485, Modbus-RTU
Internal memory	64 Mbytes Flash
Power supply	AC85～264V，50/60Hz; DC12～36V
Outer dimensions	185154176mm
DIN panel cutout	138*138mm

Installment Site

Please install the instrument at the following sites.
● Installment disk
This instrument is with disk mounted type.
● Installed places
The instrument should be installed in the interior, where wind and rain as well as direct solar radiation should be avoided.
● Places with good ventilation
To prevent the interior temperature of the instrument from increasing, please install the instrument at the places with good ventilation.
● Places with less mechanical vibration
Please choose places with less mechanical vibration to install the instrument.
● Horizontal places
Please do not tend to the left or the right when installing this instrument, but should try best to keep horizontal (able to tend to the back with the maximum of 30°).