MIK-DC2000 Liquid TSS/SS analyzing meter

This product is a general-purpose controller for water quality,suitable for use with various water quality series digital sensors of our company.It is used to monitor water quality parameters including pH,ORP,conductivity,dissolvedoxygen,turbidity,sludge concentration and other water quality parameters.Through RS485 or current transmission output to the monitoring room for record keeping.

Characteristics

pH: (0～14)pH

ORP:(-2000～2000)mV

DO:(0～40)mg/L

TDS: (0～600)mS/cm

Turbidity: (0～4000)NTU

Suspended solids: (0～120000)mg/L

Output signal: 4~20mA; Relay; RS485

Power supply: AC：(100～240)VAC; DC：24VDC(Optional)

Specification

Product	Liquid TSS/SS analyzing meter
Model	MIK-DC2000
Dimension	100mm100mm150mm
Range	pH: (0-14)pH ORP:(-2000-2000) mV DO:(0-40) mg/L TDS: (0-600) mS/cm Turbidity: (0-4000) NTU Suspended solids: (0-120000) mg/L
Relative humidity	(10~85)%
Temperature range	(0 ~ 60)℃
Communication	RS485, Modbus-RTU
Signal output	4-20mA, maximum loop 500Ω, 0.2%FS
Power supply	AC: (100-240)VAC DC: 24VDC(Optional)
Relay output	250VAC, 3A

Introduction

MIK-DC2000 Digital analyzer monitor is a general-purpose water quality controller. It is suitable for use with Supmea's multiple water quality series digital sensors. It is used to monitor water quality parameters including pH, ORP, conductivity, dissolved oxygen, turbidity, sludge concentration, etc.

MIK-DC2000 Liquid TSS/SS analyzing meter